Skip to content

Topic

Roofing

  1. 8 min read

    Sourcing Roofing Materials After Storm Damage

    Document, mitigate, then repair: how ACV vs RCV, matching provisions, discontinued shingles, and post-storm supply shortages shape what you can actually buy and when.

  2. 9 min read

    Roof Sheathing Compared: OSB vs Plywood vs ZIP System

    OSB, CDX plywood, or Huber ZIP System for roof decking? Compare span ratings, edge swell, thickness by rafter spacing, fastener schedules, and 2026 sheet pricing.

  3. 8 min read

    Roof Repair Materials: Sealants, Flashing, and Gutters

    How to diagnose a roof leak, then order the right repair basket: pipe boots, step and counter-flashing, patch membrane, the correct sealant chemistry, and gutter parts.

  4. 8 min read

    Drip Edge: Types, Sizing, and Code Requirements

    Type C, D and F drip edge profiles compared, plus IRC R905.2.8.5 sizing and fastening rules, eave vs rake install order, materials, and the gutter apron distinction.

  5. 8 min read

    TPO vs EPDM vs Modified Bitumen: Low-Slope Roofing Compared

    Below 2:12, shingles are not code-legal. Compare TPO, EPDM, and modified bitumen on seams, attachment, insulation, service life, and 2026 installed cost per square.

  6. 8 min read

    How to Do a Roof Takeoff: Squares, Bundles, Waste and Accessories

    Measure a roof and turn it into an order: squares, pitch multipliers, bundles per square, waste factors, and the full accessory takeoff most orders miss.

  7. 8 min read

    Roof Flashing Types and Where Each One Goes

    Step, apron, counter, valley, kickout, pipe boot, cricket and drip edge flashing explained: where each belongs, material gauges, galvanic pairing rules and IRC references.

  8. 8 min read

    Ice and Water Shield: Where It's Required and How Much

    How to calculate the IRC R905.1.2 ice barrier distance on a real roof pitch, where membrane belongs in any climate, and how granulated, smooth and high-temp compare.

  9. 9 min read

    Roofing Fasteners: Nails, Cap Nails, and Screws Specified Right

    Fastener errors are the most common cause of a denied roof warranty claim. Gauge, head size, length rules, 4 vs 6 nails, cap fasteners, metal screws, and galvanic pairing.

  10. 8 min read

    Synthetic vs Felt Roofing Underlayment: Full Comparison

    Synthetic and #15/#30 felt underlayment compared on coverage, weight, tear strength, walkability, UV exposure limits, IRC R905 code minimums, and cost per square.

  11. 8 min read

    Ridge Vent vs Box Vent vs Turbine vs Powered Attic Fan

    How to size attic ventilation with IRC R806 net free area, why intake must balance exhaust, and how ridge, box, turbine, powered and gable vents actually compare.

  12. 8 min read

    Soffit and Fascia: Materials, Ventilation and the Roof Edge

    How fascia sizing, soffit ventilation and the drip edge work together, with the net free area math that decides whether your attic intake actually meets code.